Oxy Stain Remover
Breathing the dust from chlorine powder can produce asthma-like symptoms. Traditional chlorine bleaches contain sodium hypochlorite, an extremely dangerous oxidizer. Bi-products of the oxidation reaction are seriously corrosive. Chlorine solutions will burn skin and cause lung, nasal passage, skin and eye damage.
Our Oxy Stain Remover Powder is a 100% chlorine free bleach. It’s a completely non-petroleum and non-phosphate product, free of dyes and perfumes.
Directions: As a laundry booster or Bleach: Add 5 minutes after wash begins or add with the laundry powder / liquid in machine’s water first, then add clothes.
To prevent whites from discolouring: Small loads: Add 1 tsp. (15g / 0.5 oz.) Regular loads: Add 2 tsp. (30g / 1 oz.) Large loads / Heavily Soiled or Stained: Add 3 tsp. (45g / 1.5 oz.)
As a Pre-Soak or Hand Wash: Separate whites from colours, use 1 full tsp. (15g/0.5 oz.) along with laundry power/liquid in n10L (2.6 gallons) of warm to hot water. Let soak for 30 minutes. Always rinse well with cool water.
As a general stain remover: ½ Tbsp to 500ml (16 oz.) of water. Apply solution to stain. Wait 1 to 5 minutes. Soak up with a white towel. Repeat if required. Rinse thoroughly and let dry.
As a carpet stain remover: ½ Tbsp to 500ml (16 oz.) of water. Soak up any excess liquid before applying solution to stain. Use only enough to saturate the stain. Wait 1 to 5 minutes. Soak up with a white towel. Repeat if required. Rinse thoroughly with water and blot well. Allow to dry and vacuum.
Ingredients: Sodium Carbonate (washing soda-alkaline builder), Sodium Carbonate Peroxide (oxygen based stain remover), Sodium Metasilicate (alkaline builder)